3000K - Warm White
1 integrated Epistar LED
Wattage / VA
0.2W | 6 Lm / 0.32 VA
cETL listed for use in Canada
Electrophoretic Black with frosted lens
22mm Ring. 16 mm Body x 20.5H mm
0.86" Ring. 0.63" Body x 0.81" Height
(2.4mm (3/32) above ground)
Suggested opening: 0.70" or 18mm (11/16th drill bit)
36" of usable #18-2
9V - 15V AC
IP67 Rated for wet locations
316 Stainless Steel
316 Stainless is more resistant to corrosion than 304 Stainless - allowing for installation around
chlorinated and salt water pools
Walk and drive-over rated
Includes 2 gel-filled wire nuts, retaining spring clip.
5 Year | 50,000 Hours
Indicator light on pavers, decks or concrete
Step lighting on entrance ways
Down-lighting on pergolas or outdoor
Installation Tip: Use heat shrink on the connection for a professional, water tight installation!
Expandable: Unlike many 12V DC dot lights on the market, these units require a 12V AC power supply. This allows you to connect to any 12V AC output landscape transformer. You are no longer limted to powering a few lights with one driver. Warranty is covered when used with ANY 12V AC output transformer listed for use in Canada.